List of Publications
1. The Shear Angle Relationship in Metal Cutting (with M. C. Shaw and N. H. Cook), Trans. ASME, 75, 73-288, 1953
2. Discontinuous Chip Formation (with M. C. Shaw and N. H. Cook), Trans. ASME, 76, 153-162. 1954.
3. The Shear Stress in Metal Cutting (with M. C. Shaw), Trans. ASME, 77, 115-125, 1956.
4. The Friction Process in Metal Cutting (with M. C. Shaw), Trans. ASME, 78, 1649-1657, 1956.
5. A Radioactive Study of the Metal Cutting Process (with E. Rabinowicz) Lubrication Engineering, 12, 715-721, 1956.
6. Review of the Metal Cutting Theories of the Past Hundred Years, Mechanical Engineering, 78, 715-721, 1956.
7. Creep Buckling of Tubes in Torsion, J. Aero Sciences, 25, 66-67, 1958.
8. A Tester for Creep Rupture under Multiaxial Stress, Proc. Soc. Exp. Stress Analysis, 12� (2), 49-54, 1959.
9. The Mechanism of Erosion of Ductile Metals, Proc. 3rd U.S. Nat. Congress of Applied Mechanics, pp. 527-532, 1958.
10. A High Temperature Diameter Gage, Rev. Scientific Instruments, 29, 1054, 1958.�
11. Creep of Engineering Materials (with W. R. Heller), McGraw-Hill Book Co. Inc., New York, 1959. Also appeared in Polish and Japanese translations (bound separately).
12. An Instability of Tubes under Internal Pressure, J. Aero/Space Sciences, 26, 248-249, 1959.
13. An Experimental Study of Erosion, Proc. Soc. Exp. Stress Analysis, 17 (2), 65-70, 1960.
14. Steady Creep of a Tube under Bending Combined with Internal Pressure, Trans. ASME, 82D, 462-464, 1960.
15. Erosion of Surfaces by Solid Particles, Wear, 3, 87-103, 1960.
16. Steady State Creep of a Thick-Walled Cylinder under Combined Axial Load and Internal Pressure, Trans. ASME, 82D, 689-694, 1960.
17. An Analytical Study of Drill String Vibration (with J. J. Bailey), Trans. ASME, 82B, 122-128, 1960.
18. An Experimental Study of Drill String Vibration (with J. J. Bailey), Trans. ASME, 82B, 129-135, 1960.
19. Stress Analysis in the Presence of Creep, Applied Mechanics Reviews, 13, 705-712, 1960.
20. The Influence of Elevated Temperature on the Strength of Expanded Tube Joints, Trans. ASME, 830, 314-315, 1961.
21. Erosion by Solid Particles in a Fluid Stream, pp. 70-82, ASTM Special Technical Publication No. 307, Erosion and Cavitation, 1961.
22. On the Functioning of a Familiar Non-Linear Thermodynamic Oscillator� (with R. L. Curl), International Union of Theoretical and Applied Mechanics, Symposium on Nonlinear Vibration, Kiev, Russia, September, 1961, pp. 486-497 of Proceedings. Vol. III, published 1963 by Ukranian Academy of Science.
23. An Empirical Creep Law from a Single Test, Trans. ASME, 84D, 236-238, 1962.
24. Comment on "On Column Behavior," J. of Aero/Space Sciences, 28, p. 282, 1961.
25. Effect of Radial Heat Transfer on the Creep Behavior of Thick-Walled Tubes Loaded by Internal Pressure, Trans. ASME, 84D, 412-413, 1962.
26. Book Review "Mechanical Properties of Metals and Alloys," Mechanical Engineering, 84 (10), 84, 1962.
27. Design of Furnace Tubes for the Creep Rupture Range, ASME WA-272 (1962).
28. Use Graphs to Predict Furnace Tube Life, Hydrocarbon Processing and Petroleum Refiner, 42 (3), 155-158, 1963.
29. Physics in a Toy Boat (with R. L. Curl), American J. of Physics, 31, 289-294, 1963.
30. Use of Chip Tension to Obtain a Stress-Strain Curve from Metal Cutting Tests (with J. Wolak), Trans. ASME, 858, 351-356, 1963.
31. An Experimental Study of Mathematical Creep in Tubes, Proceedings 1963 Joint International Conference on Creep, Inst. of Mech. Engineers, London, 2.21-2.26.
32. Creep-Rupture Tests in 9 Cr-1Mo Furnace Tube Material (with A. E. Bayce), Proceedings 1963 Joint International Conference on Creep, Inst. of Mech. Engineers, London, 5.1-5.8.
33. A Comparison of Stress Strain Behavior in Cutting with that in Other Materials Tests, "International Research in Production Engineering," ASME, New York, 76-82, 1963.
34. A Simple Model to Illustrate Some Aspects of Vibration Excitation by Delayed Terms (with B. Y. Lim), J. of Experimental Mechanics, 4, 352-355, 1964.
35. On the Formation of Surface Ripples Due to Erosion (with Y. Kabil), Wear, 8, 60-69, 1965.
36. Method for Predicting Creep in Tension and Compression from Bending Tests, J. American Ceramic Soc., 49, 218-220, 1966.
37. Stress Analysis for Creep and Creep-Rupture, Applied Mechanics Surveys (editor H. N. Abrahamson), Spartan Books, Inc., Washington, DC, 373-387, 1966. Represents an updating and extensive revision of Publication No. 19, Stress Analysis in the Presence of Creep.
38. The Mechanism of Material Removal in the Erosive Cutting of Brittle Materials (with G. L. Sheldon), Trans. ASME, 88B, 393-400, 1966.
39. On the Ductile Behavior of Nominally Brittle Materials during Erosive Cutting (with G. L. Sheldon), Trans. ASME, 88B, 387-393, 1966.
40. An Analysis of Rock Drilling by Erosion (with H. Oh), Proceedings of the First Congress of the International Society of Rock Mechanics, 2, 99-104, 1966, published by Lab. Nacional de Engenharia Civil, Lisboa, Portugal.
41. A Comparison of Stress-Strain Behavior in Cutting and High Strain-Rate Compression Tests (with J. Wolak), in Advances in Machine Tool Design and Research, 233-246, 1967, Editors: S. A. Tobias and F. Koenigsberger, Pergamon Press.
42. Erosion of Materials by Solid Particles (with Y. Kabil), J. Egyptian Soc. of Engineers, UAR, 7, 682-700, 1967.
43. Flow and Fracture in Metals (with M. J. Manjoine, et al.), Mechanical Engineering, 89, 54-59, Sept. 1967.
44. Erosion of Metals by Solid Particles (with J. Wolak and T. Kabil), Journal of Materials, 2, 682-700, 1967.
45. The Ring Cracking of Glass by Spherical Indentors (with H. Oh), J. Mechanics and Physics of Solids, 15, 401-411, 1967.
46. La Rotura Fragil en el Diseno de Ingenieria (with F. D. Negroni), Revista de Metalurgia, 4, (1), 3-19, 1968.
47. Method for Measuring Small Thermal Expansion with a Single Frequency Helium-Neon Laser (with J. D. Foster), Review of Scientific Instruments, 39, 654-657, 1986.
48. Some Aspects of the Statistical Nature of Brittle Strength, South African Mechanical Engineer, 18, 149-156, 1969.
49. The Mechanical Behavior of Rigid Plastic Foams (with M. R. Patel), Proc. 2nd Interamerican Conference on Materials Technology, ASME, New York, 597-615, 1970.
50. Review of "Creep Problems in Structural Members," Mechanical Engineering News, 7 (3), 43-44, 1970.
51. On the Location of Fracture in Brittle Solids I� Due to Static Loading (with H. L. Oh), Int. J. of Fracture Mechanics, 6, 287-300, 1970.
52. On the Location of Fracture in Brittle Solids II� Due to Wave Propagation on a Slender Rod (with K. P. L. Oh), Int. J. of Fracture Mechanics, 6, 333-339, 1970.
53. Structural Features and Mechanical Properties of Rigid Cellular Plastics (with M. R. Patel), J. of Materials, 5, 909-932, 1970.
54. Determination of Residual Stresses from Stress Intensity Factor Measurements (with S. Vaidyanathan), Trans. ASME, J. of Basic Eng., 93D, 242-246, 1971.
55. Creep and Creep-Rupture of Copper Tubes Under Multiaxial Stress (with M. M. Abo El Ata). Chapter 16 in Advances in Creep Design, edited by A. I. Smith and A. M. Nicolson, Applied Science Publishers, Ltd., London, 329-352, 1971.
56. On the Statistical Interpretation of Laboratory Test on Rocks (with E. Y. Robinson), Proc. 1969 colloque de geotechnique, Toulouse, France. Published by I.N.S.A., Toulouse, 1971.
57. Some Observations on the Erosion of Ductile Metals, Wear, 19, 81-90, 1972.
58. Grinding of Brittle Solids (with S. Vaidyanathan), New Developments in Grinding, M. C. Shaw, Ed., Carnegie Press, Pittsburgh, 813-831, 1972.
59. On the Shaping of Brittle Solids by Erosion and Ultrasonic Cutting (with H. L. Oh, K. P. L. Oh and S. Vaidyanathan), Proc. Symposium on the Science of Ceramic Machining and Surface Finishing, U.S. National Bureau of Standards Special Publication 348, U.S. Govt. Printing Office, April, 1972, pp. 119-132.
60. Reflections on the Past and Future of Creep, Creep in Structures II, J. Hult, Ed., Springer Verlag, Berlin, 8-17, 1972.
61. On the Prediction of Creep-Rupture Life of Components under Multiaxial Stress (with M. M. Abo El Ata), Creep in Structures II, J. Hult, Ed., Springer Verlag, Berlin, 80-95, 1972.
62. Measuring Fracture Toughness�� A Simplified Approach using Controlled Crack Propagation(with R. H. Weitzmann), J. of Materials, 7, 294-298, 1972.
63. A Study of Creep Damage Rules (with M. M. Abo El Ata), Trans. ASME, J. Basic Eng., 94D,533-543, 1972.
64. Shattering Rock with Intense Bursts of Energetic Electrons (with R. T. Avery, T. L. Brekke, and D. Keefe), IEEE Transactions on Nuclear Science, NS-20, 1010-1014, 1973.
65. Residual Stresses due to Circumferential Welds (with S. Vaidyanathan and A. F. Todaro), Trans. ASME, J. Eng. Materials and Technology, 95H, 233-237, 1973.
66. A Further Study of Residual Stresses in Circumferential Welds (with S. Vaidyanathan and H. Weiss), Trans. ASME, J. Eng. Materials and Technology, 95H, 238-242, 1973.
67. The Initiation and Propagation of Hertzian Ring Cracks (with S. Vaidyanathan), pp. 231-244 in Fracture Mechanics of Ceramics, Plenum Publishing Co., New York, New York, 1974.
68. Failure of Brittle Solids Under Biaxial Stresses (with K. P. L. Oh and O. Vardar), Int. J. of Fracture, 9, 372-375, 1973.
69. A Note on the Angled Crack Problem and the Directional Stability of Cracks (with A. Saith), Int. J. of Fracture, 9, 484-486, 1973.
70. Some Observations on Sih's Strain Energy Density Approach for Fracture Prediction (with H. D. Weiss), Int. J. of Fracture, 10, 136-128, 1974.
71. Further Studies of Crack Propagation Using the Controlled Crack Propagation Approach (with R. H. Weitzmann), Fracture Toughness and Stable Cracking, ASTM STP 559, Am. Soc. for Testing and Materials, 1974, pp. 111-126.
72. Life-Prediction for Furnace Tubes Operating in the Creep Rupture Range (with M. R. Patel), Paper D3, Proc. 1974 Symposium on Mechanical Behavior of Materials, Kyoto, Japan, published by Soc. of Materials Science, Japan.
73. The Mechanisms of Ultrasonic Grinding of Brittle Solids (with H. L. Oh and D. Pankow), Proc. Int. Conf. on Production Eng.,Tokyo, Japan, 1974, pp. 109-113, published by Japan Soc. of Precision Engineering.
74. Use of Intense Sub-Microsecond Electron Bursts to Produce Rock Shattering (with R. T. Avery, D. Keefe and T. L. Brekke), "Advances in Rock Mechanics," Proc. of 3rd Congress of Int. Soc. of Rock Mechanics, Denver, Col., Sept. 1974, Vol. 11, pp. 1415-1420, Nat. Acad. Sciences, 1974.
75. Disen o de Ingenieria Utilizando Materials Fragiles (with F. D. Negroni), "Apuntes de Ingenieria," 3, 69-97, 1974, published by Universidad Catolica de Chile, Santiago, Chile.
76. A Fracture Mechanics Approach to Creep Crack Propagation (in Japanese) (with M. Sakata), Trans. Japan Soc. Mech. Engrs., 41, 1089-1094, 1975.
77. An Analysis of the Brazilian Disk Fracture Test Using the Weibull Probabilistic Treatment of Brittle Strength (with O. Vardar), Int. J. Fracture, 11, 495-508, 1975.
78. Hard-Rock Tunneling Using Pulsed Electron Beams (with R. L. Avery, D. Keefe and T. L. Brekke), IEEE Trans. Nuclear Science, NS-22, 1798-1801, 1975.
79. Void Growth and Localization of Shear in Plane Strain Tension (with M. W. Perra), Proc. 4th Int. Conf. on Fracture, University of Waterloo Press, Waterloo, Canada, 2, 415-423, 1977.
80. The Prediction of Fracture in Brittle Solids Subjected to Very Short Duration Tensile Stress (with O. Vardar), Int. J. Fracture, 13, 115-131, 1977.
81. Effect of Spherical Pores on the Strength of a Polycrystalline Ceramic (with O. Vardar, D. R. Biswas and R. M. Fulrath), Int. J. Fracture, 13, 215-223, 1977.
82. Rock Excavation by Pulsed Electron Beams (with R. T. Avery, D. Keefe and T. L. Brekke), Physics in Industry (editors E. O'Mongain and C. P. O'Toole), Pergamon Press, Oxford 1976, pp. 139-143.
83. Fracture Toughness of a High-Strength Beryllium at Room Temperature and 300 C (with M. W. Perra), J. of Materials Science, 12, 1519-1526, 1977.
84. The Prevention of Fracture, Proc. Mech. Eng. Congress, Shiraz, Iran, April 28-May 1, 1975 (editors M. A. Satter and K. Firoozbakhsh), published by Pahlavi University, Shiraz, Iran, 1977.
85. Waloddi Weibull�� 90 Years Young on June 18, 1977, ASME J. Eng. Mat. & Technology, 99, 193, 1977.
86. On the Velocity Dependence of the Erosion of Ductile Metals by Solid Particles at Low Angles of Incidence (with D. H. McFadden), Wear, 48, 181-190, 1978.
87. Fracture Propagation in Rocks due to Transient Cooling (with G. A. Cooper and J. Berlie), Int. J. of Rock Mechanics and Mining Sci., 16, 11-21, 1979.
88. The Fundamental Mechanisms of the Erosive Wear of Ductile Metals by Solid Particles (with A. Levy and D. H. McFadden), ASTM STP 664, "Erosion: Prevention and Useful Applications," 36-58, 1979.
89. A Classification of Three-Body Abrasive Wear and Design of a New Tester" (with A. Misra), Wear of Metals (K. C. Ludema et al., editors), ASME, New York, 313-318, 1979. Also in Wear, 60, 111-121, 1980.
90. Erosion of Metals, Proc. of Conf. on Corrosion/Erosion of Coal Conversion System Materials, Berkeley, Jan. 1979, pub. by Nat. Assoc. Corrosion Engrs., 429-443, 1979. Also in same volume, Future Research Directions in Basic Mechanisms, pp. 915-916.
91. The Directional Stability of Crack Propagation (with R. D. Streit), Mechanical Behavior of Materials (editors K. J. Miller and R. F. Smith), Pergamon Press, 3, 469-478, 1979.
92. Fundamental Approaches to the Statistical Fracture Analysis of Brittle Solids (with D. H. Pankow), Mechanical Behavior of Materials (editors K. J. Miller and R. F. Smith), Pergamon Press, 3, 67-76, 1979.
93. Particulate Erosion of Ni0 Scales (with G. Zambelli), Proc. 5th Int. Conf. on Erosion by Liquid and Solid Impact, Cambridge, England, pp. 49.1-49.6, Sept. 1979.
94. Some Unsolved Problems in the Mechanics of Fracture, Proc. 1st Cairo Univ. Conf. on Mech. Design and Production, Cairo, Egypt, 1, pp. N1-1-N1-10, 1979. Also published in Current Advances in Mechanical Design and Production (S. A. Shawki and S. M. Metwalli, editors), Pergamon Press, pp. 203-212, 1981.
95. On the Scribing and Subsequent Fracturing of Silicon Semiconductor Wafers (with A. Misra), J. Mat. Sci., 14, 2567-2574, 1979.
96. An Experimental Investigation of Crack Path Directional Stability (with R. Streit), Experimental Mechanics, 20, 17-23, 1980.
97. The Mechanisms of Erosive Wear in Ductile Metals, Corrosion-Erosion Behavior of Materials (K. Natesan, editor), Spec. Vol. published by Metallurgical Society of AIME, 118-126, 1980.
98. On the Machining of Glass (with J. Giovanola), J. Mat. Sci., 15, 2508-2514, 1980.
99. Mechanisms of Wear, 1st Int. Conf. Prod. Eng., Design and Control, Alexandria, Egypt, Dec. 1980.
100. On the Size Effect in Abrasive and Erosive Wear (with A. Misra), Wear, 65, 359-373, 1981.
101. Correlations between Two-Body and Three-Body Abrasion and Erosion of Metals (with A. Misra), Wear, 65, 359-373, 1981.
102. Some Observations on Two-Body Abrasive Wear (with A. Misra), Wear, 68, 41-56, 1981.
103. On the Physical Basis of Auerbach's Law (with D. Dolev and M. Khatibloo), ASME J.�� Eng. Mat. & Technology, 103, 183-184, 1981.
104. A Moving-Load Controlled-Displacement Fracture-Toughness Testing Machine (with V. K. Pujari and F. E. Hauser), Experimental Mechanics, 21, 234-239, 1981.
105. An Experimental Study of Three-Body Abrasive Wear (with A. Misra), Wear of Materials 1981 (edited by S. K. Rhee et al.), ASME, New York, 1981. Also published in Wear, 85, 57-68, 1983.
106. Some Observations on the Wear of Single Point Diamond Tools Used for Machining Glass (with R. Glardon), J. Mat. Sci., 16, 1776-1784, 1981.
107. A Review of the Recent Literature on Unlubricated Sliding Wear of Dissimilar Metals� (with R. Glardon), ASME J. Eng. Mat. & Technology, 103, 333-340, 1981.
108. A Review of the Abrasive Wear of Metals (with A. Misra), ASME J. Eng. Mat. & Technology, 104, 94-101, 1982.
109. Uniaxial Stress-Strain Curves from a Bending Test (with R. A. Mayville), Experimental Mechanics, 22, 197-201, 1982.
110. The Use of Notched Beams to Establish a Multiaxial Fracture Criterion for Beryllium� (with R. A. Mayville), ASME J. Eng. Mat. & Technology, 104, 200-206, 1982.
111. A Study of the Friction and Wear of Cartridge and Free-Cutting Brass (with R. Glardon), ASME J. Eng. Mat. & Technology, 105, 31-35, 1983.
112. An Experimental Study of Three Body Abrasive Wear (with A. Misra), Wear, 85, 57-68, 1983.
113. A Comparative Investigation of the Sliding Wear of Some FCC Metals (with R. Glardon), ASME J. Eng. Mat. & Technology, 105, 36-41, 1983.
114. Flaws, Fracture Mechanisms and Hertzian Cracks in Brittle Solids (with D. Dolev), Proc. 4th Int. Conf. on Materials, 771-777, Stockholm, 1983.
115. An Evaluation of the Compact Shear Specimen for Mixed Mode Fracture Studies (with R. A. Riddle and R. D. Streit), ASME J. Eng. Mat. & Technology, 105, 268-272, 1983.
116. Predictions of the Stress Intensity Factor for an Internal Circumferential Crack at a Butt-Weld Between Cylinders Using the Plane Strain Solution (with W. Cheng and G. Stevick), ASME J. Eng. Mat. & Technology, 106, 21-24, 1984.
117. The Simulation of Sliding Wear by Cyclic Plastic Deformation under Combined Stresses (with R. Glardon and S. Chavez), ASME J. Eng. Mat. & Technology, 106, 248-252, 1984.
118. A Review of the J-Integral as a Fracture Parameter (with J. H. Giovanola), Solid Mechanics Archives, 9, 197-225, 1984.
119. The Crack Opening Displacement (COD) as a Fracture Parameter and a Comparative Assessment of the COD and J-Integral Concepts (with J. H. Giovanola), Solid Mechanics Archives, 9, 227-257 (1984).
120. Tensile Fracture of Glass Capillaries under Controlled Inner and Outer Wall Environments (with C. A. Nielsen), Bull. Am. Ceram. Soc., 63, 1422-1426, 1984.
121. An Analysis of the Loaded Abrasive Column Type of Wear Tester (with G. Stevick and S. Soemantri), Wear, 101, 77-80, 1985.
122. Some Aspects of Abrasive Wear at Elevated Temperatures (with S. Soemantri and A. C. McGee), Wear, 104, 77-91, 1985.
123. On the Prediction of Stress Intensity Factors for Axisymmetric Cracks in Thin-Walled Cylinders from Plane Strain Solutions (with W. Cheng), ASME J. of Eng. Mat. & Technology, 107, 227-234, 1985.
124. A Method for Measurement of Axisymmetric Axial Residual Stresses in Circumferentially Welded Thin-Walled Cylinders (with W. Cheng), ASME J. of Eng. Mat. & Technology, 107, 181-185, 1985.
125. The Size Effect in Abrasion, Erosion, Grinding and Cutting of Metals (with S. Soemantri), Proc. M. C. Shaw Grinding Symposium (editor R. Komanduri), pp. 35-44, ASME Special Volume PED-Vol. 16, 1985.
126. Some Design Procedures for Tubing under Internal or External Pressure at Elevated Temperature, Proc. 1985 Int. Conf. on Creep, pp. 527-531. Published by Japan Society of Mech. Eng., Tokyo, 1985.
127. Erosive Wear of Composite Materials (with K. V. Pool and C. K. H. Dharan), Wear, 107,1-12, 1986.
128. Determination of Stress Intensity Factors for Partial Penetration Axial Cracks in Thin-Walled Cylinders (with W. Cheng), ASME J. Eng. Mat. & Technology, 108, 83-86, 1986.
129. Measurement of Residual Hoop Stresses in Cylinders using the Compliance Method (with W. Cheng), ASME J. Eng. Mat. & Technology, 108, 87-92, 1986.
130. Examination of Computational Model for the Layer Removal Method for Residual Stress Measurement (with W. Cheng), Experimental Mechanics, 26, 150-153, 1986.
131. Abrasive Wear of Graphite Fiber-Reinforced Polymer Composite Materials (with A. C. McGee and C. K. H. Dharan), Wear, 114, 97-107, 1986.
132. A New Method of Measurement of Residual Stresses Applied to a Multi-Pass Butt Welded Cylinder (with W. Cheng), ASME J. Eng. Mat. & Tech., 109, 337-342, 1987.
133. The Failure of Aluminum Compact Shear Specimens Under Mixed-Mode Loading (with R. A. Riddle and R. Streit), in Fracture Mechanics: Eighteenth Symposium, ASTM STP 945, D. T. Read and R. P. Reed, Eds., Am. Soc. for Testing and Materials, Philadelphia, 1988, pp. 118-133.
134. Tribology of Ceramics, Nat. Materials Advisory Board, NMAB 435, 1988.
135. KI Solutions for an Edge-Cracked Strip (with W. Cheng), Eng. Fracture Mechanics, 31, 201-207, 1988.
136. Stress Intensity Factors for Radial Cracks in Circular Cylinders and Other Simply Closed Cylindrical Bodies (with W. Cheng), Eng. Fracture Mechanics, 32, 767-774, 1989.
137. Subsurface Fracture and the Wear of Brittle Solids (with E. Ling), in The Role of Subsurface Zones in the Wear of Materials, ed. by R. Solecki, Trans. Tech. Publications, Switzerland, 1989, pp. 49-76.
138. Historical Aspects in Our Understanding of the Brittle Fracture of Steel (with R. A. Mayville), ASME J. Eng. Mat. & Technology, 112, 56-60, 1990.
139. A Mechanism for Sub-Surface Median Crack Initiation in Glass During Indenting and Scribing (with W. Cheng), J. Mat. Sci., 25, 575-579, 1990.
140. Median Cracking of Solids due to Scribing with Sharp Indenters (with W. Cheng and E. Ling), J. Am. Ceramic Soc., 73, 580-586, 1990.
141. Methods for Determining the Mode I and Mode II Fracture Toughness of Glass Using Thermal Stresses (with J. T. Gillanders, R. A. Riddle and R. D. Streit), ASME J. Eng. Mat. & Technology, 112, 151-156, 1990.
142. KII Solutions for an Edge-Cracked Strip (with W. Cheng), Eng. Fracture Mechanics, 36, 355-360, 1990.
143. Delayed Crack Propagation in a Steel Pressure Vessel due to Thermal Stresses (with W. Cheng and K. J. McCorkindale), Int. J. Press. Vessels and Piping, 42, 15-31, 1990.
144. Creep Deformation of Thick-Walled Piping due to Combined Bending and Internal Pressure (with M. Shirmohamadi), ASME J. Pressure Vessel Technology, 112, 251-255, 1990.
145. The Simulation of Sliding Wear by Cyclic Deformation: Microstructural Aspects (with F. Dupont), Wear, 140, 93-106, 1990.
146. The Crack Compliance Method for Residual Stress Measurement (with W. Cheng), Welding in the World, 28, 103-110, 1990.
147. Measurement of Residual Stresses Near the Surface Using the Crack Compliance Method (with W. Cheng and O. Vardar), ASME J. Eng. Mat. & Technology, 113, 199-204, 1991.
148. Stress Concentrations Resulting from Longitudinal Butt-Welds in Piping at Elevated Temperature (with G. R. Stevick) in Creep in Structures (M. Zyczkowski ed.), pp. 629-636, Springer-Verlag, Berlin, 1991.
149. An Experimental Method for Determining Residual Stresses in Welds (with W. Cheng) in Modeling of Casting, Welding and Advanced Solidification Processes - V, (M. Rappaz ed.), The Minerals, Metals and Materials Soc., Warrendale, PA, USA, 1991.
150. Failure Assessment of Welds at Elevated Temperature (with G. R. Stevick) inMechanical Behavior of Materials - VI (M. Jono and T. Inoue eds.), Vol. 2, pp. 149-154, Pergamon Press, 1991.
151. The Influence of Impingement Angle on the Erosion of Ductile Metals by Angular Abrasive Particles (with G. R. Stevick and J. R. Ridgely), Wear, 152, 91-98, 1992.
152. Estimation of Axisymmetric Residual Stresses in a Long Cylinder (with W. Cheng and O. Vardar), ASME J. Eng. Mat. & Technology, 114, 137-140, 1992.
153. Measurement of Residual Stresses Through the Thickness of a Strip using the Crack-Compliance Method (with W. Cheng and M. B. Prime), Residual Stresses�� III (Proc. 3rd Int. Conf. on Residual Stress , Tokushima, Japan, July 1991), eds. H. Fujiwara et al. Elsevier Science Publishers, Vol. 2, pp. 1127-1132, 1992.
154. Measurement of Residual Stresses in Laser Treated Layers using the Crack Compliance Method (with M. Gremaud, W. Cheng and M. Prime), Proc. of Int. Conf. on Laser Advanced Materials Processing, Nagoya, Japan, June 1992, eds. A. Matsunawa and S. Katayama, pp. 713-718.
155. Measurement of Residual Stress Distributions near the Toe of a Weld between a Bracket and a Plate using the Crack Compliance Method (with W. Cheng), Proc. of IUTAM Symposium, "Mechanical Effects of Welding," Lulea, Sweden, eds. L. Karlsson et al., Springer-Verlag, pp. 135-141, 1992.
156. Deformation of an Edge-Cracked Strip Subjected to Normal Surface Traction on the Crack Faces (with W. Cheng and O. Vardar), Eng. Fracture Mechanics, 42, 97-108, 1992.
157. Measurement of Residual Stress Distribution near the Toe of an Attachment Welded on a Plate Using the Crack Compliance Method (with W. Cheng), Eng. Frac. Mechanics, 46, pp. 79-92, 1993.
158. A Prediction of the Strength of Glass Following the Formation of Subsurface Flaws by Scribing (with W. Cheng), J. Am. Ceram. Soc., 75, 2565-2572 (1992).
159. Deformation of an Edge-Cracked Strip Subjected to Arbitrary Shear Surface Traction on the Crack Faces (with W. Cheng), Eng. Fracture Mechanics, 43, 33-40, 1992.
160. A Comparison of Strains due to Edge Cracks and Cuts of Finite Width in a Semi-Infinite Elastic Plate (with W. Cheng), ASME J. Eng. Mat. & Technology, 115, 220-226 (1993).
161. Measurement of Near Surface Residual Stresses Using Electric Discharge Wire Machining (with W. Cheng, M. Gremaud and M. B. Prime), ASME J. Eng. Mat. & Technology, 116, 1-7, 1994.
162. An Overview of the Compliance Method for Residual Stress Measurement (with W. Cheng), Proc. 4th Int. Conf. on Residual Stress, pp. 449-458, 1994, pub. by Soc. for Exp. Mechanics, Bethel, CT, USA.
163. Measurement of the Residual Stress Distribution in a Disk or Solid Cylinder Using the Crack Compliance Method (with H. J. Schindler and W. Cheng), Proc. 4th Int. Conf. on Residual Stress, pp. 1266-1274, 1994, pub. by Soc. for Exp. Mechanics, Bethel, CT, USA.
164. The Compliance Method for Measurement of Near Surface Residual Stresses� Analytical Background (with M. Gremaud et al.), ASME J. Eng. Mat. & Technology, 116, 550-555, 1994.
165. The Compliance Method for Measurement of Near Surface Residual Stresses�� Application and Validation for Surface Treatment by Laser and Shot-Peening (with W. Cheng et al.), ASME J. Eng. Mat. & Technology, 116, 556-560, 1994.
166. Unit Manufacturing Processes Issues and Opportunities in Research, Report of the Unit Manufacturing Process Research Committee (I. Finnie, Chairman), National Academy Press, Washington, DC, 1995 (bound separately).
167. Some Reflections on the Past and Future of Erosion, Wear, 186, 1-10, 1995.
168. Residual Stresses and Fracture Mechanics (with W. Cheng), ASME J. Eng. Mat. & Technology, 117, 373-378, 1995.
169. Analysis of the Fluid-Elastic Vibration of a U-bend Tube Bundle Induced by Cross-flow in PWR Steam Generators (with W. Cheng), Nuclear Eng. and Design, 160, 111-128, 1996.
170. Residual Stress Measurement by the Introduction of Slots or Cracks (with W. Cheng), Localized Damage IV (eds. H. Nisitani et al.), pp. 37-51, Computational Mechanics Publications, Southampton, Boston, 1996.
171. Crack Initiation and Growth in Weldments at Elevated Temperatures (with G. R. Stevick), Localized Damage IV (eds. H. Nisitani et al.), pp. 473-484, Computational Mechanics Publications, Southampton, Boston, 1996.
172. Surface Strains due to Face Loading of a Slot in a Half-Space (with M. B. Prime), ASME J. Eng. Mat. & Technology, 118, 410-418, 1996.
173. Analysis of the Fluid Elastic Vibration of a U-bend Tube Bundle Induced by Cross-Flow in a PWR Steam Generator, Nuclear Engineering and Design, 111-128, 1996.
174. Stress Analysis and Fatigue Life Prediction for a U-Bend Steam Generator Tube (with W. Cheng), Nuclear Eng. and Design, 165, 101-109, 1996.
175. Computation of Stress Intensity Factors for a 2-D Body from Displacements at an Arbitrary Location (with W. Cheng), Int. J. Fracture, 81, 259-267, 1996.
176. Computation of Mode I Stress Intensity Factors for a Three-Dimensional Body Using Displacements at an Arbitrary Location (with W. Cheng), Int. J. Fracture, 83, 91-104, 1997.
177. Determination of Residual Stresses and the Resulting Stress Intensity Factors in the Ligament of Precracked Plates (with H. J. Schindler), "Advances in Fracture Research," Proc. Int. Conf. Fracture 9 (eds. B. L. Karihaloo et al.), Pergamon Press, pp. 523-530, 1997.
178. Experimental Determination of Stress Intensity Factors due to Residual Stresses (with H. J. Schindler and W. Cheng), Expt. Mechanics, 37, 272-277, 1997.
179. A New Method for Measurement of Axisymmetric Residual Stresses in Cylindrical Bodies in Plane Strain (with W. Cheng), Fifth Int. Conference on Residual Stresses, Vol. 2, pp. 658-667, 1997.
180. The Computation and Measurement of Residual Stresses in Laser Deposited Layers (with S. Finnie et al.), European Conference on Residual Stress, Cluny, France, 1997.
181. Examples of the Influence of Residual Strain on Fracture (with W. Cheng), Fifth Int. Conference on Fracture, Honolulu, Hawaii, 2001.
182. Exhibit of Step by Step Fatigue Crack Propagation Using the General Fatigue Diagram (with M. P. Weiss, et al.), Fatigue 2002, Stockholm, Sweden.
183. A Summary of Past Contributions to Residual Stress (with W. Cheng), Mat. Sci. Forum, Vol. 404-407, 2002, pp. 509-514, Trans. Tech. Publications, Switzerland.
184. Residual Stress Measurement on a Pyrolitic Carbon Coated Graphite Leaflet (with W. Cheng and R. O. Ritchie), to be published by Soc. Exp. Stress Analysis.
